ostp/scripts/install.sh

#!/bin/bash
set -e

GITHUB_REPO="ospab/ostp"
INSTALL_DIR="/opt/ostp"
BIN_LINK="/usr/local/bin/ostp"
CONFIG_DIR="/etc/ostp"
CONFIG_FILE="$CONFIG_DIR/config.json"

# Legacy paths to check for migration
LEGACY_PATHS=(
    "$HOME/ostp"
    "/root/ostp"
    "/usr/local/ostp"
    "/usr/share/ostp"
)

echo "========================================================"
echo " OSTP Installer v3"
echo "========================================================"

# Verify root
if [ "$EUID" -ne 0 ]; then
    echo "[error] Root privileges required. Run with sudo."
    exit 1
fi

mkdir -p "$INSTALL_DIR"
mkdir -p "$CONFIG_DIR"

# ── Migration from legacy installations ──────────────────────────────

migrate_legacy() {
    local old_dir="$1"
    echo "[migrate] Found legacy installation at $old_dir"

    # Migrate config if exists and new one doesn't
    if [ -f "$old_dir/config.json" ] && [ ! -f "$CONFIG_FILE" ]; then
        echo "[migrate] Moving config: $old_dir/config.json -> $CONFIG_FILE"
        cp "$old_dir/config.json" "$CONFIG_FILE"
    fi

    # Migrate binary if no new binary yet
    if [ -f "$old_dir/ostp" ] && [ ! -f "$INSTALL_DIR/ostp" ]; then
        echo "[migrate] Moving binary: $old_dir/ostp -> $INSTALL_DIR/ostp"
        cp "$old_dir/ostp" "$INSTALL_DIR/ostp"
    fi

    echo "[migrate] Legacy files preserved at $old_dir (remove manually if no longer needed)"
}

# Check for legacy /opt/ostp/config.json (old layout: config in install dir)
if [ -f "$INSTALL_DIR/config.json" ] && [ ! -f "$CONFIG_FILE" ]; then
    echo "[migrate] Moving config from $INSTALL_DIR/config.json -> $CONFIG_FILE"
    cp "$INSTALL_DIR/config.json" "$CONFIG_FILE"
    mv "$INSTALL_DIR/config.json" "$INSTALL_DIR/config.json.bak"
fi

# Check legacy paths
for lpath in "${LEGACY_PATHS[@]}"; do
    if [ -d "$lpath" ] && [ -f "$lpath/ostp" ]; then
        migrate_legacy "$lpath"
    fi
done

# Remove stale symlinks
if [ -L "$BIN_LINK" ] && [ ! -e "$BIN_LINK" ]; then
    rm -f "$BIN_LINK"
fi

# ── Architecture detection ───────────────────────────────────────────

ARCH=$(uname -m)
case "$ARCH" in
    x86_64)       ARCH="amd64" ;;
    aarch64|arm64) ARCH="arm64" ;;
    i386|i686)    ARCH="386" ;;
    armv7l)       ARCH="armv7" ;;
    mips|mipsel)  ARCH="$ARCH" ;;
    *)
        echo "[warn] Unknown architecture $ARCH, defaulting to amd64."
        ARCH="amd64"
        ;;
esac

echo "Platform: linux/$ARCH"

# ── Parse arguments ────────────────────────────────────────────────────
TARGET_VERSION=""
TARGET_BRANCH="stable"
while [[ $# -gt 0 ]]; do
  case $1 in
    -v|--version)
      TARGET_VERSION="$2"
      shift 2
      ;;
    -b|--branch)
      TARGET_BRANCH="$2"
      shift 2
      ;;
    *)
      shift
      ;;
  esac
done

# ── Download binary ──────────────────────────────────────────────────

if [ -n "$TARGET_VERSION" ]; then
    LATEST_RELEASE="$TARGET_VERSION"
    # Ensure it starts with 'v' if it's supposed to (only for real stable
    # semver tags — the nightly/pre-release channels use bare tag names).
    if [[ ! "$LATEST_RELEASE" =~ ^v ]] && [ "$TARGET_BRANCH" == "stable" ]; then
        LATEST_RELEASE="v$LATEST_RELEASE"
    fi
    echo "Fetching requested release $LATEST_RELEASE..."
else
    if [ "$TARGET_BRANCH" == "nightly" ]; then
        echo "Fetching nightly release..."
        LATEST_RELEASE="nightly"
    elif [ "$TARGET_BRANCH" == "pre-release" ]; then
        echo "Fetching pre-release..."
        LATEST_RELEASE="pre-release"
    else
        echo "Fetching latest stable release..."
        LATEST_RELEASE=$(curl -s "https://api.github.com/repos/${GITHUB_REPO}/releases/latest" | grep '"tag_name":' | sed -E 's/.*"([^"]+)".*/\1/')
    fi
fi

if [ -z "$LATEST_RELEASE" ] || [[ "$LATEST_RELEASE" == *"null"* ]]; then
    echo "[notice] Could not determine latest release automatically."
    echo "Enter a direct URL to the .tar.gz archive,"
    echo "or press Enter if the binary is already in $INSTALL_DIR/ostp."
    read -p "URL: " DIRECT_URL
    if [ -n "$DIRECT_URL" ]; then
        TEMP_TAR="/tmp/ostp_temp.tar.gz"
        curl -L "$DIRECT_URL" -o "$TEMP_TAR"
        tar -xzf "$TEMP_TAR" -C "$INSTALL_DIR" ostp 2>/dev/null || tar -xzf "$TEMP_TAR" -C "$INSTALL_DIR"
        rm -f "$TEMP_TAR"
    fi
else
    ARCHIVE_NAME="ostp-linux-${ARCH}.tar.gz"
    DOWNLOAD_URL="https://github.com/${GITHUB_REPO}/releases/download/${LATEST_RELEASE}/${ARCHIVE_NAME}"
    echo "Downloading: $ARCHIVE_NAME ($LATEST_RELEASE)"

    TEMP_TAR="/tmp/ostp_temp.tar.gz"
    HTTP_CODE=$(curl -sL -w "%{http_code}" "$DOWNLOAD_URL" -o "$TEMP_TAR")

    if [ "$HTTP_CODE" -eq 200 ]; then
        tar -xzf "$TEMP_TAR" -C "$INSTALL_DIR" ostp 2>/dev/null || tar -xzf "$TEMP_TAR" -C "$INSTALL_DIR"
        rm -f "$TEMP_TAR"
    else
        echo "[error] Download failed (HTTP $HTTP_CODE)."
        echo "Verify that $LATEST_RELEASE is published at:"
        echo "  https://github.com/$GITHUB_REPO/releases"
        rm -f "$TEMP_TAR"
        exit 1
    fi
fi

if [ -f "$INSTALL_DIR/ostp" ]; then
    chmod +x "$INSTALL_DIR/ostp"
    echo "Binary installed: $INSTALL_DIR/ostp"
else
    echo "[error] Binary not found at $INSTALL_DIR/ostp."
    exit 1
fi

# ── Create global symlink ────────────────────────────────────────────

ln -sf "$INSTALL_DIR/ostp" "$BIN_LINK"
echo "Symlink created: $BIN_LINK -> $INSTALL_DIR/ostp"

# ── Update detection ─────────────────────────────────────────────────

if [ -f "$CONFIG_FILE" ]; then
    echo "--------------------------------------------------------"
    echo "Existing configuration found at $CONFIG_FILE."
    echo "Binary updated to ${LATEST_RELEASE:-latest}."

    # Config SCHEMA migration does NOT happen here (or anywhere automatic) —
    # it used to be an ad-hoc Python snippet embedded right in this script,
    # silently rewriting config.json on every update. That's exactly the kind
    # of surprise this project no longer does: the ONE place a config's shape
    # is ever changed is the explicit `ostp migrate` command (see
    # ostp-client::migrate), which backs up the original file first and
    # prints exactly what it changed. If your config predates this install,
    # run it yourself:
    echo "If this config is from an older OSTP version, run 'ostp migrate' to upgrade it."

    # Update systemd service to use new paths
    if [ -f "/etc/systemd/system/ostp.service" ]; then
        if grep -q "WorkingDirectory=$INSTALL_DIR" /etc/systemd/system/ostp.service && \
           grep -q "$CONFIG_FILE" /etc/systemd/system/ostp.service; then
            : # Service already uses correct paths
        else
            echo "Updating systemd service to use new paths..."
            cat <<EOF > /etc/systemd/system/ostp.service
[Unit]
Description=OSTP Stealth Transport Protocol
After=network.target
Wants=network-online.target

[Service]
Type=simple
User=root
WorkingDirectory=$INSTALL_DIR
ExecStart=$INSTALL_DIR/ostp --config $CONFIG_FILE
Restart=always
RestartSec=5
LimitNOFILE=65535
Environment=RUST_LOG=info

[Install]
WantedBy=multi-user.target
EOF
            systemctl daemon-reload
        fi
    fi

    if systemctl is-active --quiet ostp.service 2>/dev/null; then
        echo "Restarting ostp service..."
        systemctl restart ostp.service
        echo "Service restarted."
    elif systemctl is-enabled --quiet ostp.service 2>/dev/null; then
        echo "Service registered but not running."
        echo "Start manually: systemctl start ostp"
    fi
    echo "--------------------------------------------------------"
    echo "Update complete."
    exit 0
fi

# ── First install: delegate to the built-in setup wizard ─────────────

echo ""
echo "No configuration found. Launching setup wizard..."
echo ""

cd "$INSTALL_DIR"
exec ./ostp --setup --config "$CONFIG_FILE"