ospab
/
ostp
mirror of https://github.com/ospab/ostp.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
ostp/scripts/install.sh

559 lines
19 KiB
Bash
Raw Blame History

#!/bin/bash
set -e
GITHUB_REPO="ospab/ostp"
INSTALL_DIR="/opt/ostp"
BIN_LINK="/usr/local/bin/ostp"
CONFIG_DIR="/etc/ostp"
CONFIG_FILE="$CONFIG_DIR/config.json"
# Legacy paths to check for migration
LEGACY_PATHS=(
"$HOME/ostp"
"/root/ostp"
"/usr/local/ostp"
"/usr/share/ostp"
)
echo "========================================================"
echo " OSTP Installer v2"
echo "========================================================"
# Verify root
if [ "$EUID" -ne 0 ]; then
echo "[error] Root privileges required. Run with sudo."
exit 1
fi
mkdir -p "$INSTALL_DIR"
mkdir -p "$CONFIG_DIR"
# ── Migration from legacy installations ──────────────────────────────
migrate_legacy() {
local old_dir="$1"
echo "[migrate] Found legacy installation at $old_dir"
# Migrate config if exists and new one doesn't
if [ -f "$old_dir/config.json" ] && [ ! -f "$CONFIG_FILE" ]; then
echo "[migrate] Moving config: $old_dir/config.json -> $CONFIG_FILE"
cp "$old_dir/config.json" "$CONFIG_FILE"
fi
# Migrate binary if no new binary yet
if [ -f "$old_dir/ostp" ] && [ ! -f "$INSTALL_DIR/ostp" ]; then
echo "[migrate] Moving binary: $old_dir/ostp -> $INSTALL_DIR/ostp"
cp "$old_dir/ostp" "$INSTALL_DIR/ostp"
fi
echo "[migrate] Legacy files preserved at $old_dir (remove manually if no longer needed)"
}
# Check for legacy /opt/ostp/config.json (old layout: config in install dir)
if [ -f "$INSTALL_DIR/config.json" ] && [ ! -f "$CONFIG_FILE" ]; then
echo "[migrate] Moving config from $INSTALL_DIR/config.json -> $CONFIG_FILE"
cp "$INSTALL_DIR/config.json" "$CONFIG_FILE"
# Keep old file as backup
mv "$INSTALL_DIR/config.json" "$INSTALL_DIR/config.json.bak"
fi
# Check legacy paths
for lpath in "${LEGACY_PATHS[@]}"; do
if [ -d "$lpath" ] && [ -f "$lpath/ostp" ]; then
migrate_legacy "$lpath"
fi
done
# Remove stale symlinks
if [ -L "$BIN_LINK" ] && [ ! -e "$BIN_LINK" ]; then
rm -f "$BIN_LINK"
fi
# ── Architecture detection ───────────────────────────────────────────
ARCH=$(uname -m)
case "$ARCH" in
x86_64) ARCH="amd64" ;;
aarch64|arm64) ARCH="arm64" ;;
i386|i686) ARCH="386" ;;
armv7l) ARCH="armv7" ;;
mips|mipsel) ARCH="$ARCH" ;;
*)
echo "[warn] Unknown architecture $ARCH, defaulting to amd64."
ARCH="amd64"
;;
esac
echo "Platform: linux/$ARCH"
# ── Download binary ──────────────────────────────────────────────────
echo "Fetching latest release..."
LATEST_RELEASE=$(curl -s "https://api.github.com/repos/${GITHUB_REPO}/releases/latest" | grep '"tag_name":' | sed -E 's/.*"([^"]+)".*/\1/')
if [ -z "$LATEST_RELEASE" ] || [[ "$LATEST_RELEASE" == *"null"* ]]; then
echo "[notice] Could not determine latest release automatically."
echo "Enter a direct URL to the .tar.gz archive,"
echo "or press Enter if the binary is already in $INSTALL_DIR/ostp."
read -p "URL: " DIRECT_URL
if [ -n "$DIRECT_URL" ]; then
TEMP_TAR="/tmp/ostp_temp.tar.gz"
curl -L "$DIRECT_URL" -o "$TEMP_TAR"
tar -xzf "$TEMP_TAR" -C "$INSTALL_DIR" ostp 2>/dev/null || tar -xzf "$TEMP_TAR" -C "$INSTALL_DIR"
rm -f "$TEMP_TAR"
fi
else
ARCHIVE_NAME="ostp-linux-${ARCH}.tar.gz"
GUI_ARCHIVE_NAME="ostp-gui-linux-${ARCH}.tar.gz"
DOWNLOAD_URL="https://github.com/${GITHUB_REPO}/releases/download/${LATEST_RELEASE}/${ARCHIVE_NAME}"
GUI_DOWNLOAD_URL="https://github.com/${GITHUB_REPO}/releases/download/${LATEST_RELEASE}/${GUI_ARCHIVE_NAME}"
echo "Downloading: $ARCHIVE_NAME ($LATEST_RELEASE)"
TEMP_TAR="/tmp/ostp_temp.tar.gz"
HTTP_CODE=$(curl -sL -w "%{http_code}" "$DOWNLOAD_URL" -o "$TEMP_TAR")
if [ "$HTTP_CODE" -eq 200 ]; then
tar -xzf "$TEMP_TAR" -C "$INSTALL_DIR" ostp 2>/dev/null || tar -xzf "$TEMP_TAR" -C "$INSTALL_DIR"
rm -f "$TEMP_TAR"
else
echo "[error] Download failed (HTTP $HTTP_CODE)."
echo "Verify that $LATEST_RELEASE is published at:"
echo " https://github.com/$GITHUB_REPO/releases"
rm -f "$TEMP_TAR"
exit 1
fi
fi
if [ -f "$INSTALL_DIR/ostp" ]; then
chmod +x "$INSTALL_DIR/ostp"
echo "Binary installed: $INSTALL_DIR/ostp"
else
echo "[error] Binary not found at $INSTALL_DIR/ostp."
exit 1
fi
# We don't download GUI binary immediately, we will do it if the user selects Client + GUI mode
# ── Create global symlink ────────────────────────────────────────────
ln -sf "$INSTALL_DIR/ostp" "$BIN_LINK"
echo "Symlink created: $BIN_LINK -> $INSTALL_DIR/ostp"
echo "You can now run 'ostp' from anywhere."
# ── Detect public IP ─────────────────────────────────────────────────
SERVER_IP=$(curl -4s https://ifconfig.me 2>/dev/null \
|| curl -4s https://api.ipify.org 2>/dev/null \
|| curl -4s https://icanhazip.com 2>/dev/null \
|| hostname -I | awk '{print $1}')
# ── Update detection ─────────────────────────────────────────────────
if [ -f "$CONFIG_FILE" ]; then
echo "--------------------------------------------------------"
echo "Existing configuration found at $CONFIG_FILE."
echo "Binary updated to ${LATEST_RELEASE:-latest}."
# ── Config migration: add new fields, preserve existing values ──
echo "Checking for new config fields..."
python3 << 'PYEOF'
import json, sys
CONFIG = '/etc/ostp/config.json'
with open(CONFIG) as f:
raw = f.read()
lines = [l for l in raw.split('\n') if not l.strip().startswith('//')]
cfg = json.loads('\n'.join(lines))
changed = False
# Ensure api section has all modern fields
if cfg.get('mode') == 'server':
if 'api' not in cfg:
cfg['api'] = {}
changed = True
api_defaults = {
'enabled': False,
'bind': '0.0.0.0:9090',
'webpath': '',
'username': '',
'password_hash': '',
}
for k, v in api_defaults.items():
if k not in cfg['api']:
cfg['api'][k] = v
changed = True
print(f'[migration] Added api.{k} = {json.dumps(v)}')
# Remove legacy "token" field if present
if 'token' in cfg['api']:
del cfg['api']['token']
changed = True
print('[migration] Removed legacy api.token field')
if changed:
with open(CONFIG, 'w') as f:
json.dump(cfg, f, indent=2, ensure_ascii=False)
print('[ok] Config migrated: new fields added, existing data preserved.')
else:
print('[ok] Config is up to date, no migration needed.')
PYEOF
# Update systemd service to use new paths
if [ -f "/etc/systemd/system/ostp.service" ]; then
if grep -q "WorkingDirectory=$INSTALL_DIR" /etc/systemd/system/ostp.service && \
grep -q "$CONFIG_FILE" /etc/systemd/system/ostp.service; then
: # Service already uses correct paths
else
echo "Updating systemd service to use new paths..."
cat <<EOF > /etc/systemd/system/ostp.service
[Unit]
Description=OSTP Stealth Transport Protocol
After=network.target
Wants=network-online.target
[Service]
Type=simple
User=root
WorkingDirectory=$INSTALL_DIR
ExecStart=$INSTALL_DIR/ostp --config $CONFIG_FILE
Restart=always
RestartSec=5
LimitNOFILE=65535
Environment=RUST_LOG=info
[Install]
WantedBy=multi-user.target
EOF
systemctl daemon-reload
fi
fi
# ── Panel setup prompt (if not yet configured) ──
PANEL_USERNAME=$(python3 -c "
import json
with open('$CONFIG_FILE') as f:
raw = f.read()
lines = [l for l in raw.split('\n') if not l.strip().startswith('//')]
cfg = json.loads('\n'.join(lines))
print(cfg.get('api', {}).get('username', ''))
" 2>/dev/null)
if [ -z "$PANEL_USERNAME" ] && python3 -c "
import json
with open('$CONFIG_FILE') as f:
raw = f.read()
lines = [l for l in raw.split('\n') if not l.strip().startswith('//')]
cfg = json.loads('\n'.join(lines))
exit(0 if cfg.get('mode') == 'server' else 1)
" 2>/dev/null; then
echo ""
echo "Web panel is not configured."
read -p "Set up web panel now? [y/N]: " SETUP_PANEL
if [[ "$SETUP_PANEL" =~ ^[Yy]$ ]]; then
read -p "Panel port [default: 9090]: " PANEL_PORT
PANEL_PORT=${PANEL_PORT:-9090}
RANDOM_PATH=$(tr -dc 'a-zA-Z0-9' < /dev/urandom | head -c 8)
read -p "WebPath [leave empty for random: $RANDOM_PATH]: " WEBPATH
WEBPATH=${WEBPATH:-$RANDOM_PATH}
read -p "Username [default: admin]: " USERNAME
USERNAME=${USERNAME:-admin}
RANDOM_PASS=$(tr -dc 'a-zA-Z0-9' < /dev/urandom | head -c 12)
read -p "Password [leave empty for random: $RANDOM_PASS]: " PASSWORD
PASSWORD=${PASSWORD:-$RANDOM_PASS}
PASS_HASH=$(python3 -c "import hashlib; print(hashlib.sha256('$PASSWORD'.encode()).hexdigest())")
python3 << PYEOF
import json
with open('$CONFIG_FILE') as f:
raw = f.read()
lines = [l for l in raw.split('\n') if not l.strip().startswith('//')]
cfg = json.loads('\n'.join(lines))
if 'api' not in cfg:
cfg['api'] = {}
cfg['api']['enabled'] = True
cfg['api']['bind'] = '0.0.0.0:$PANEL_PORT'
cfg['api']['webpath'] = '$WEBPATH'
cfg['api']['username'] = '$USERNAME'
cfg['api']['password_hash'] = '$PASS_HASH'
with open('$CONFIG_FILE', 'w') as f:
json.dump(cfg, f, indent=2, ensure_ascii=False)
print('[ok] Panel configured.')
PYEOF
echo ""
echo "========================================================"
echo "Panel configured!"
echo "URL: http://$SERVER_IP:$PANEL_PORT/$WEBPATH/"
echo "Username: $USERNAME"
echo "Password: $PASSWORD"
echo "========================================================"
fi
fi
if systemctl is-active --quiet ostp.service 2>/dev/null; then
echo "Restarting ostp service..."
systemctl restart ostp.service
echo "Service restarted."
elif systemctl is-enabled --quiet ostp.service 2>/dev/null; then
echo "Service registered but not running."
echo "Start manually: systemctl start ostp"
fi
echo "--------------------------------------------------------"
echo "Update complete."
exit 0
fi
# ── Interactive setup (first install) ────────────────────────────────
echo "--------------------------------------------------------"
echo "Select mode:"
echo " 1) Server"
echo " 2) Client"
echo " 3) Relay"
echo " 4) Server + Web Panel"
echo " 5) Client + GUI"
echo "--------------------------------------------------------"
read -p "Choice [1-5]: " NODE_MODE
cd "$INSTALL_DIR"
if [ "$NODE_MODE" == "1" ]; then
echo "Initializing server configuration..."
./ostp --init server --config "$CONFIG_FILE"
read -p "Listen address [default: 0.0.0.0:50000]: " LISTEN_ADDR
if [ -n "$LISTEN_ADDR" ]; then
sed -i "s/\"listen\": \".*\"/\"listen\": \"$LISTEN_ADDR\"/g" "$CONFIG_FILE"
fi
read -p "Number of access keys [default: 1]: " KEYS_COUNT
KEYS_COUNT=${KEYS_COUNT:-1}
if [ "$KEYS_COUNT" -gt 1 ]; then
echo "Generating $KEYS_COUNT access keys..."
NEW_KEYS=$(./ostp -g -c "$KEYS_COUNT" | sed 's/^/ "/;s/$/"/' | paste -sd ',' | sed 's/,/,\n/g')
# Replace the access_keys array
python3 -c "
import json, subprocess, sys
with open('$CONFIG_FILE') as f:
content = f.read()
# Strip comments for parsing
lines = [l for l in content.split('\n') if not l.strip().startswith('//')]
cfg = json.loads('\n'.join(lines))
keys = subprocess.check_output(['$INSTALL_DIR/ostp', '-g', '-c', '$KEYS_COUNT']).decode().strip().split('\n')
cfg['access_keys'] = keys
with open('$CONFIG_FILE', 'w') as f:
json.dump(cfg, f, indent=2)
" 2>/dev/null || echo "[warn] Key injection via python3 failed. Edit config manually."
fi
echo ""
echo "Server access key(s):"
grep -oP '"[0-9a-f]{32}"' "$CONFIG_FILE" | tr -d '"' | while read key; do
echo " $key"
done
echo ""
echo "Server configuration saved: $CONFIG_FILE"
elif [ "$NODE_MODE" == "4" ]; then
echo "Initializing server configuration..."
./ostp --init server --config "$CONFIG_FILE"
read -p "Listen address [default: 0.0.0.0:50000]: " LISTEN_ADDR
if [ -n "$LISTEN_ADDR" ]; then
sed -i "s/\"listen\": \".*\"/\"listen\": \"$LISTEN_ADDR\"/g" "$CONFIG_FILE"
fi
# Panel Setup
echo "--- Web Panel Setup ---"
read -p "Panel port [default: 9090]: " PANEL_PORT
PANEL_PORT=${PANEL_PORT:-9090}
RANDOM_PATH=$(tr -dc 'a-zA-Z0-9' < /dev/urandom | head -c 8)
read -p "WebPath (leave empty for random: /$RANDOM_PATH/): " WEBPATH
WEBPATH=${WEBPATH:-$RANDOM_PATH}
read -p "Username [default: admin]: " USERNAME
USERNAME=${USERNAME:-admin}
RANDOM_PASS=$(tr -dc 'a-zA-Z0-9' < /dev/urandom | head -c 12)
read -p "Password (leave empty for random: $RANDOM_PASS): " PASSWORD
PASSWORD=${PASSWORD:-$RANDOM_PASS}
# Hash password with python
PASS_HASH=$(python3 -c "import hashlib; print(hashlib.sha256('$PASSWORD'.encode()).hexdigest())")
# Inject into config
python3 -c "
import json
with open('$CONFIG_FILE') as f:
lines = [l for l in f.read().split('\n') if not l.strip().startswith('//')]
cfg = json.loads('\n'.join(lines))
if 'api' not in cfg:
cfg['api'] = {}
cfg['api']['enabled'] = True
cfg['api']['bind'] = '0.0.0.0:' + str('$PANEL_PORT')
cfg['api']['webpath'] = '$WEBPATH'
cfg['api']['username'] = '$USERNAME'
cfg['api']['password_hash'] = '$PASS_HASH'
with open('$CONFIG_FILE', 'w') as f:
json.dump(cfg, f, indent=2)
" 2>/dev/null || echo "[warn] Failed to configure panel via python. Edit config manually."
echo ""
echo "========================================================"
echo "Panel installed successfully!"
echo "URL: http://$SERVER_IP:$PANEL_PORT/$WEBPATH/"
echo "Username: $USERNAME"
echo "Password: $PASSWORD"
echo "========================================================"
elif [ "$NODE_MODE" == "2" ] || [ "$NODE_MODE" == "5" ]; then
echo "Initializing client configuration..."
./ostp --init client --config "$CONFIG_FILE"
read -p "Server address (host:port): " REMOTE_SERVER
if [ -n "$REMOTE_SERVER" ]; then
sed -i "s/\"server\": \"127.0.0.1:50000\"/\"server\": \"$REMOTE_SERVER\"/g" "$CONFIG_FILE"
else
echo "[warn] No server address provided. Using default (127.0.0.1:50000)."
fi
read -p "Access key: " ACCESS_KEY
if [ -z "$ACCESS_KEY" ]; then
ACCESS_KEY=$(./ostp -g)
echo "Generated key: $ACCESS_KEY"
fi
sed -i "s/\"access_key\": \"[^\"]*\"/\"access_key\": \"$ACCESS_KEY\"/g" "$CONFIG_FILE"
read -p "Local proxy address [default: 127.0.0.1:1088]: " SOCKS_BIND
if [ -n "$SOCKS_BIND" ]; then
sed -i "s/\"socks5_bind\": \"127.0.0.1:1088\"/\"socks5_bind\": \"$SOCKS_BIND\"/g" "$CONFIG_FILE"
fi
echo "Client configuration saved: $CONFIG_FILE"
if [ "$NODE_MODE" == "5" ]; then
echo "Installing GUI..."
if [ -n "$LATEST_RELEASE" ]; then
TEMP_GUI_TAR="/tmp/ostp_gui_temp.tar.gz"
echo "Downloading GUI: $GUI_ARCHIVE_NAME ($LATEST_RELEASE)"
HTTP_CODE_GUI=$(curl -sL -w "%{http_code}" "$GUI_DOWNLOAD_URL" -o "$TEMP_GUI_TAR")
if [ "$HTTP_CODE_GUI" -eq 200 ]; then
tar -xzf "$TEMP_GUI_TAR" -C "$INSTALL_DIR" ostp-gui 2>/dev/null || tar -xzf "$TEMP_GUI_TAR" -C "$INSTALL_DIR"
rm -f "$TEMP_GUI_TAR"
if [ -f "$INSTALL_DIR/ostp-gui" ]; then
chmod +x "$INSTALL_DIR/ostp-gui"
ln -sf "$INSTALL_DIR/ostp-gui" "/usr/local/bin/ostp-gui"
echo "GUI binary installed at $INSTALL_DIR/ostp-gui"
# Create desktop entry
DESKTOP_FILE="/usr/share/applications/ostp-gui.desktop"
cat <<EOF > "$DESKTOP_FILE"
[Desktop Entry]
Name=OSTP Client
Comment=Ospab Stealth Transport Protocol Client
Exec=/usr/local/bin/ostp-gui
Icon=utilities-terminal
Terminal=false
Type=Application
Categories=Network;Utility;
EOF
echo "Desktop entry created at $DESKTOP_FILE"
else
echo "[error] GUI binary not found in archive."
fi
else
echo "[error] Download failed for GUI (HTTP $HTTP_CODE_GUI)."
rm -f "$TEMP_GUI_TAR"
fi
else
echo "[notice] Automatic download not possible. Install GUI manually."
fi
fi
elif [ "$NODE_MODE" == "3" ]; then
echo "Initializing relay configuration..."
./ostp --init relay --config "$CONFIG_FILE"
read -p "Listen address [default: 0.0.0.0:50000]: " LISTEN_ADDR
if [ -n "$LISTEN_ADDR" ]; then
sed -i "s/\"listen\": \".*\"/\"listen\": \"$LISTEN_ADDR\"/g" "$CONFIG_FILE"
fi
read -p "Upstream server IP/port (e.g. 1.2.3.4:50000): " UPSTREAM_ADDR
if [ -n "$UPSTREAM_ADDR" ]; then
sed -i "s/\"upstream_tcp\": \".*\"/\"upstream_tcp\": \"$UPSTREAM_ADDR\"/g" "$CONFIG_FILE"
sed -i "s/\"upstream_udp\": \".*\"/\"upstream_udp\": \"$UPSTREAM_ADDR\"/g" "$CONFIG_FILE"
fi
read -p "Upstream API URL (e.g. http://1.2.3.4:9090): " UPSTREAM_API
if [ -n "$UPSTREAM_API" ]; then
sed -i "s|\"upstream_api_url\": \".*\"|\"upstream_api_url\": \"$UPSTREAM_API\"|g" "$CONFIG_FILE"
fi
read -p "Upstream API token: " UPSTREAM_TOKEN
if [ -n "$UPSTREAM_TOKEN" ]; then
sed -i "s/\"upstream_api_token\": \".*\"/\"upstream_api_token\": \"$UPSTREAM_TOKEN\"/g" "$CONFIG_FILE"
fi
echo "Relay configuration saved: $CONFIG_FILE"
else
echo "[error] Invalid selection."
exit 1
fi
# ── Register systemd service ─────────────────────────────────────────
echo "Registering systemd service..."
cat <<EOF > /etc/systemd/system/ostp.service
[Unit]
Description=OSTP Stealth Transport Protocol
After=network.target
Wants=network-online.target
[Service]
Type=simple
User=root
WorkingDirectory=$INSTALL_DIR
ExecStart=$INSTALL_DIR/ostp --config $CONFIG_FILE
Restart=always
RestartSec=5
LimitNOFILE=65535
Environment=RUST_LOG=info
[Install]
WantedBy=multi-user.target
EOF
systemctl daemon-reload
systemctl enable ostp.service >/dev/null 2>&1
echo ""
echo "========================================================"
echo " Installation complete"
echo "========================================================"
echo ""
echo " Binary: $INSTALL_DIR/ostp"
echo " Command: ostp (available globally)"
echo " Config: $CONFIG_FILE"
echo " Service: systemctl start ostp"
echo " Logs: journalctl -u ostp -f"
echo ""
echo " Quick commands:"
echo " ostp --check Validate configuration"
echo " ostp --generate-key Generate access key"
echo " ostp --links Print client share links"
echo " systemctl status ostp Service status"
echo ""
Reference in New Issue View Git Blame Copy Permalink